Table Saw

# How Many Amps Does a Table Saw Use?

Written by

You enjoy working with wood. You know how to work with wood, and you know how to make things that are both beautiful and useful. And you’re building your perfect woodworking shop, maybe in the basement or the garage.

But just knowing how to work with wood is not enough to make your dream workshop. You must enquire how many amps does a table saw use. What power does it render? And will it work with the electricity you already have? This energy has to do with things like amps, watts, volts, extension cords, and the needs of the power tools in your shop.

Let’s look at how much energy table saws need and what kind of electrical service they need to work well.

## A Brief Glance at Watt, Amperes, and Volt

Watts, amps, and volts all have a lot in common. If you know how to balance them out, you can put more than one heavy-duty tool on your workshop panel.

• Power is measured in watts. A watt is the amount of work done when one ampere (amp) of electricity flows through a difference in electrical potential of one volt.
• A volt measures how much electricity can move. It’s like water pressure or water moving through pipes if you will. Volts measure the force that moves electrons (which are what make electricity what it is) through a circuit.
• An amp, or ampere, is a way to measure how much electricity is flowing. And the number of electrons moving through a circuit is called it is current. At 110 volts, one amp is equal to 120 watts, and at 240 volts, one amp is equal to 240 watts.

## How Many Amps Does a Table Saw Use?

How much electricity your table saw needs depends on how often the motor runs and how much power it needs to cut through wood. Usually, 1.5 to 2 HP are needed for a 10-inch contractor table saw to cut 3.5 to 4 inches deep. Only 15 amps will make them work.

A 12-inch table saw, on the other hand, is used to cut wood that is 4 inches thick or more. Compared to others, it needs more electricity. To make 1800 watts of power, a 12-inch saw should have a current of 20 amps.

But you can always change how much electricity is used by changing the length of the lead, the voltage, and the resistance to the flow of electricity.

## What Changes the Number of Amps a Table Saw Needs?

Let’s look at the things that affect how much money you need to run a table saw right now. In the end, you’ll know how to figure out how many amps a table saw uses.

A table saw is a special tool that professionals use to cut the wood into different shapes and make different things from it. Several things have been put inside the body of this tool so that it can be used.

These devices have a big effect on how much electricity or power the table saw needs to work. Some of these are talked about here, along with a short explanation of how they affect the amount of power used.

### The Capacity of The Motor:

First, you should look at the motor’s specifications, where everything is clearly labeled. You will see, among other things, the horsepower of the motor (HP). This factor shows how much power this tool needs to be used.

So, you should look at this factor to figure out how much power is being used. In fact, the amount of power and the amount of current are directly linked. Because of this, the number of amperes this tool needs to run depends on the size of the motor.

This is a physical factor that will change how much electricity a table saw needs. The saw with blades that are sharper and smoother will use less electricity than one with dull blades.

If the blades on a table saw the break, the number of amps will automatically go up. To use this tool in this way, you need to set up a heavy, powerful circuit that can carry more current.

### Wood Product:

Last but not least, the type of wood also has a small effect on how many amps you need to supply. Because cutting through the hardwood requires a tool with sharp blades and a lot of force.

So, choose a table saw with a strong motor and a sharp blade. In turn, this means that more amps will be used than in simple, everyday situations. In plain English, you can say that softwood needs a table saw that can run on low power, not a tool that can handle a lot of power.

## Can a 15 amp Table Saw be Used on a 20 amp Circuit?

Yes, using a 15 Amp table saw on a 20 Amp circuit is possible, and that’s electrical codes while plugging in any units. However, it is not recommended as the saw may overload the circuit, causing it to trip and potentially leading to electrical hazards.

A 15-amp table saw should be plugged into a dedicated 15-amp circuit with a circuit breaker that is the right size. This will ensure the saw operates safely and within its designed specifications. Because they are safer, extension cords are the best choice.

A 15 amp breaker is made to protect a circuit that can handle up to 15 amps of current. A 20 amp breaker is designed to protect a circuit that is rated for a maximum of 20 amps of current flow.

The main difference between a 15 amp breaker and a 20 amp breaker is how much current the breaker can safely cut off in case of an electrical fault. A 20 amp breaker can stop more current than a 15 amp breaker, which means it gives the circuit it serves a higher level of protection.

It is important to match the breaker size to the size of the wire that is being used in the circuit. If a 15 amp breaker is used on a 20 amp circuit, the breaker may trip often or may not trip at all in the event of an electrical fault, which can be dangerous. Try some extension cords to keep your power source and circuits safe.

## A Few Thoughts Regarding Extender Cords:

Extension cords are graded based on the amount of electrical energy they are meant to carry and the required distance. As extension cables become longer, their current-carrying capacity decreases.

A 12-gauge extension lead should suffice for the needs of a hobbyist workshop. It is compatible with a 15 amp table saw, which is most likely in your workshop, and provides the necessary current.

But, if your lead must be longer than 50 feet, you should select a 10-gauge lead, since it will provide power to your table saw more efficiently.

As promised, there is no examination of the technical information regarding watts, amps, and volts. And you don’t need to comprehend this technical information; that’s why we call electricians for assistance. You just want your table saw to work when you need it and to do it effectively and without blowing fuses or amp breakers.

But, you are now aware of the questions to ask and critical factors to consider when purchasing a table saw, including the number of circuits your shop may require and the use of extension cords.

## How to Build a Circuit Panel to Provide Sufficient Energy for Your Power Tools?

Before installing a panel in your workshop, you should make a list of all the electronics and how much electricity they need to run. The setup should work well enough for two or more tools to be used at the same time.

If you have enough money, you can put in 2 or 3 separate circuit panels for different tools. But the high-power tool can be used in your existing panel by:

• Adding more voltage ( potential difference)
• Shortening the length of an extension lead
• Putting in a breaker.

### Double the Potential Difference:

We know that power, written as p = I x V, is the product of current flow and voltage. If the potential difference doubles, the amount of current that needs to flow will drop by half. But this won’t change how much power the saw needs.

For the table saw to start up, it needs 4000 watts of power. A 120-volt motor needs 34 amps of current to make 4000 watts of power. But you can only get the same amount of power from a 220v motor if you use 18 amps.

This lowers your monthly electricity bill and gives you enough power to run lights, fans, and bulbs in the shop at the same time.

### Reduce the Cord’s Length:

Carpenters increasingly prefer portable products more than before. In consideration of customer demand, the manufacturers created a corded table saw. However, this consumes more electricity.

A 12-gauge cable will encounter greater resistance than a 10-gauge cable. And as per Ohm’s law, the current is inversely proportional to resistance. Hence, if resistance increases, electricity consumption will inevitably rise.

### Connect a Circuit Breaker:

The workshop’s circuit panel gets too hot because the lights, fans, and power tools are used all the time. Sometimes, too much electricity flows through your device and hurts the way it works inside.

A circuit breaker or fuse can save you \$1,000 tools if you install them carefully. When too much electricity goes through the wires, the fuse burns out and stops the flow of electricity.

## Bottom Line: how many watts does a table saw use?

In answer to the question, “How many amps does a table saw use?“, the answer is that it depends on the size and type of the table saw. A standard 10-inch table saw uses about 15 amps, while a larger cabinet saw can use up to 20 amps or more. It’s important to look at the table saw’s specifications to find out how much power it needs.

FAQs about how many watts does a table saw use?

### Which of the 15 amp and 20 amp Table Saws Cuts Deep?

A 10-inch blade on a 15-amp table saw cuts through 3.5 inches of wood smoothly. And a 12-inch-long blade on a 20-amp table saw cuts through a 4-inch-thick piece of hardwood without any trouble.

### Are Table Saws that use a lot of Electricity Better?

The power is high when there is a lot of current flowing. So, saws that use a lot of electricity cut more precisely and in less time.

Related Posts: