Wood is, without a doubt, one of the most common building materials used in the building business. It is used to build a wide range of structures, both at home and on the job. For this reason, any woodworker needs to get the best table saw on the market.
And it doesn’t matter if you are just starting out or if you have been working with wood for years. The table saw is a must-have for anyone who likes to work with wood and wants to save time. And the best table saw under $500 dollars is for you if you are a beginner or don’t want to spend a lot of money.
This tool can, among other things, help you cut pieces of wood to the exact sizes you need. Having one of these works of art will also make your desk stand out from the rest.
So be sure to stay with it until the end.
Our Recommendations Best Table Saw Under 500 Dollars
|DEWALT DWE7485 Table Saw- Top Pick:
|Clear blade protection
Metal roll cage
portable and diminutive
|Ryobi 10 in. Table Saw – Best Budget
|Easy to carry and small
Not expensive at all
Adjustable blade cover and pawl to stop kickback
|DEWALT 10-Inch Portable Table Saw-Best Value
|System for telescoping fence rails
Modular guarding system by Site-Pro
Included carbide blade
Storage on board
|Bosch 10-Inch Portable Jobsite Table Saw
|Portable and diminutive
0.5-inch dado blade capacity
Smart Guard safety system
Simple fence alterations
|Rockwell RK7241S Table Saw
A rip capacity of 30 inches
Cut depth of almost four inches
|SKIL 3410-02 10-Inch Table Saw
|24.5-inch rip capacity
EZ view measurement system Self-aligned rip fence
|WEN 3720 15A Jobsite Table Saw
|Portable with a stand that folds up
Includes rip stick
|Hitachi C10RJ 10″ 15-Amp Jobsite Table Saw
|A large amount of cutting space
Storage on board
Built to last, it comes with a 2-year limited warranty.
|Delta 36-6013 10 Inch Table Saw:
|Made for professionals who install floors
Powerful 15 amp motor for cutting with precision
|Grizzly G0869-10″ 2 HP Benchtop Table Saw
|On-board storage is designed to make things easier.
It has a safety riving blade built in.
|Includes a miter gauge
Top 10 Best Table Saw Under 500 Dollars:
1) DEWALT DWE7485 Table Saw- Top Pick:
The DEWALT Table Saw, 8-1/4 Inch, Compact for Jobsites, 15 Amp Motor (DWE7485) is an excellent choice for professionals and DIY enthusiasts alike who are looking for a reliable and efficient table saw that is easy to transport and store. Its compact size and metal roll cage make it durable and sturdy enough for job site use.
The rack and pinion telescoping fence rails allow for easy and accurate fence adjustments, while the 24.5 inches of rip capacity make it possible to rip 4×8 plywood or OSB sheets. The 15 Amp, 5800 rpm motor provides plenty of power for any cutting job, and the onboard storage ensures that the site pro guarding components and push stick are always within reach.
With its combination of portability, ease of use, and guaranteed toughness, the DEWALT Table Saw is a great investment for anyone looking for a high-quality table saw that can handle a variety of cutting tasks.
The Dewalt DWE7458 is one of our favorite tools, so it’s our top pick. The portable table saw is easy to move around because it is small. The rack and pinion telescoping fence rails on the small table saw make everything easier and smoother to change.
The 15 amp, 5,800 RPM motor is powering the blade, which is held in place by a metal roll cage. The blade guard is clear so you can see through it, and there is even a place to store your tools right on the board.
2) Ryobi 10 in. Table Saw – Best Budget:
This small saw is great for woodworkers on a budget or even homeowners who only need a table saw occasionally. The saw only weighs 50 pounds and takes up very little space because of its small size. But this means that the saw can only cut 12 inches wide, which makes it hard to sell to more experienced woodworkers and contractors.
Even though this saw is small, don’t let its size fool you. Users say that the saw makes it easy to cut through hardwood boards. Even better, even though the saw is light, the rip fence and table are strong enough to hold heavier pieces of wood without buckling or bending.
The saw also has safety features like a blade cover that can be adjusted without tools and a pawl that stops the blade from kicking back. Even better, the saw has a push stick built in so you never have to put your hands near the blade.
Of course, it’s important to note that this saw doesn’t have a lot of uses. The saw isn’t made to take a stack of dado blades, and users have found that the miter gauges aren’t as precise as they could be. Because the table isn’t very big, it can be hard to add precision accessories, and the small space in front of the blade can make kickback worse.
The three-year warranty and 90-day money-back guarantee from Ryobi are very impressive for a table saw that costs so little.
3) DEWALT 10-Inch Portable Table Saw-Best Value:
Users loved how cheap and useful this Dewalt table saw was. It has a number of features that are usually only found on more expensive saws. First, people liked that the table is small and has a telescoping fence rail system that lets the rip capacity go as far to the right as 24 inches.
The Site-Pro modular guarding system also makes it easy for users to change the blade cover quickly and without tools for different cuts. That gives you a lot of reasons to keep the blade cover on all the time, which makes this saw a lot safer.
Users thought that the saw’s 15-amp motor gave it more power than it needed to cut thin softwood and hardwood boards. Also, the saw comes with a 24-tooth carbide blade, which is much better than the blades that come with most table saws.
Even though the part of the table in front of the blade is only a few inches long, hobbyists found that this saw works well in a small shop. That means there’s a big chance of kickback if you don’t add another table to hold the boards. Still, the saw’s built-in storage was a nice touch, and users liked that the back feet of the stand could be adjusted to work on any floor.
Dewalt gives this saw a three-year warranty and a 90-day money-back guarantee to make the price more appealing.
4) Bosch 10-Inch Portable Jobsite Table Saw
This Bosch tabletop saw is very easy to move around, which makes it a favorite among contractors. The saw is only 52 pounds and has a handle and storage on board so you won’t forget a blade or accessory.
The downside of this saw’s small size is that even with the telescoping fence rails, it can only rip wood up to 18 inches wide. But the large 0.5-inch dado blade capacity is a big plus for contractors who often need to join wood pieces together.
The saw can cut up to 3-1/8 inches and can be angled up to 45 degrees, so it can be used to make a wide range of cuts. Users also liked that the fence locks securely in place and is easy to adjust thanks to a precise measurement system on the bottom of the saw.
This saw has a lot of features that make it safer. The Smart Guard system combines the blade cover, a riving knife, and an anti-kickback pawl so that you are fully protected when cutting. The riving knife and blade cover are easy to change without tools, so you can decide for each cut if you need more access to the blade.
Users did have some concerns about this saw that had nothing to do with how well it worked. Even compared to other 15-amp table saws, the engine is very loud, and the saw does not come with a stand. Also, Bosch’s one-year warranty and a 30-day money-back guarantee aren’t as long as what Dewalt and Ryobi offer with their saws.
5) Rockwell RK7241S Table Saw:
This table saw has a lot of nice features, but our review gives it a low score because Rockwell’s customer service isn’t very good and the blade doesn’t always line up right.
To start with the good things about this saw, it has a 30-inch rip capacity and a fence rail that can be extended. The saw weighs 74 pounds, which is pretty heavy, but that same weight lets it easily cut through thick hardwood boards. Some users said they mostly used the saw as a stationary saw because it has most of the power of a hybrid saw but costs half as much.
Also, both hobbyists and professionals liked that the saw could cut to a depth of 3-9/16 inches and that it had a laser indicator and storage on board. Even better, the saw comes with a dust bag, which can make cleaning up a lot easier if you don’t have a shop vacuum.
But all of these great features need to be weighed against the fact that the blades don’t always line up right. Users found that the blade was out of place enough that it hit the throat plate over and over again. Outside of the 30-day money-back guarantee period, Rockwell doesn’t cover this, and many users say the company has bad customer service.
Still, this can be fixed if the saw is taken apart and put back together correctly. Because of this, people who are willing to put in some work can still get the most out of this saw.
6) SKIL 3410-02 10-Inch Table Saw:
This sturdy table saw is great for people who are just starting out in woodworking because it has a large ripping capacity, precise adjustments, and many safety features. The table saw has an aluminum table that can be pulled out to 24.5 inches to the right or 12 inches to the left of the blade.
That means that most people who are just starting out won’t have to mess with an extra wood stand when working on bigger boards. Also, the rip fence is made to self-align, which makes it much less likely that kickback will happen when rip cuts are made.
The strong wheel under the table makes it easy to adjust the saw and miter gauges. Plus, the EZ view measurement system makes it easy to make cuts that are very accurate and take very little time.
Some users thought the miter gauge was sloppy, but this is easy to fix as you learn more about the saw. The saw can use dado blades up to 13/15 inches long and can make bevel cuts up to 45 degrees. This means that as you get better at woodworking, this saw can grow with you.
The only thing that users didn’t like about this saw is that it is bigger and heavier than other saws. This isn’t a problem if you have a large shop at home, but it can make it hard for contractors who need a more portable option to use this saw.
7) WEN 3720 15A Jobsite Table Saw:
This fairly big table saw is for hobbyists who like to work with bigger boards but don’t want to upgrade to a hybrid table saw. The saw has a huge 3-9/16-inch depth of cut with a 10-inch blade and a 26-inch rip capacity with telescoping rip fence rails.
But keep in mind that the motor is still only 15 amps, so you’ll need to be careful not to overpower the saw when cutting through thick pieces of wood.
Users had the most trouble with this saw when it came to alignment. Many users said that the saw is out of alignment when they got it and that after every cut, the miter gauges and the blade themselves would move up to half an inch out of place.
Users were surprised to find that the rip fence is pretty sturdy and won’t move once it’s locked in place. Still, these problems with accuracy are a big problem for professionals who need a saw that can cut the same thing over and over again.
Even though it was big, people found this saw to be easy to move around. The saw can be taken off of the stand, which folds up and has eight-inch wheels for moving the saw around. The saw also has storage built right into it.
The price is even better because the saw comes with a rip stick and a 10-inch carbide blade. Wen gives you a limited warranty for two years, but you can’t get your money back once you get the saw.
8) Hitachi C10RJ 10″ 15-Amp Jobsite Table Saw:
The Soft Start feature on the Hitachi C10RJ reduces noise and kickback when you turn on the table saw. The electric brake can stop the spinning blade in just a few seconds, which makes it a great choice for people who care more about safety.
This table saw has a bevel range of 0 to 45 degrees, so it can make cuts from 3 1/8 inches to 2 1/4 inches long. The knobs for adjusting the beveling height and the scale are on the front of the cabinet so they are easy to reach.
The saw comes with a 10-inch, 40-tooth carbide-tipped blade that is very good at cutting. It has a telescoping table extension that lets you cut things up to 35 inches wide on the right side of the saw and 22 inches wide on the left.
The big power switch for the table saw is at knee height, making it easy to turn on and off. It also has a safety cover that can be pulled down in case of an emergency. The Hitachi C10RJ table saw is easy to move and transport because its stand can be folded up.
Also, since it weighs 96 pounds, it doesn’t move around as much when you cut, and it’s built to last.
Some users may find it hard to move, though. Some customers also said that the manual and assembly instructions are hard to follow.
On the other hand, this table saw has a warranty that covers it for 2 years. Lastly, it has storage for all the tools you might need, making it a great table saw.
9) Delta 36-6013 10 Inch Table Saw:
The Delta table saw 36-6013 adds value to any home because it can cut up to 25 inches wide. The table saw is made for people who work in the flooring business. It can handle large stock because it can rip up to 25 inches.
It can even tear through stock that is 13/16 inches by 8 inches. Also, the table saw can cut right through stacked dadoes. The size of the table saw goes well with how well it works.
The Delta 36-6013 table saw can cover up to 559 square inches of surface area. The size and design of the tube steel frame make it stable when making big cuts. This saw has a 15 amp motor and can cut different kinds of wood.
Even hardwoods and lumber are no problem for it. Its heavy-duty fence design makes it easy to put in position tabs quickly. A telescoping rail system is also part of the table saw.
The system makes it easy and accurate to make changes to the fence. The three adjustment tabs on the rails make it easy to move the fence. But they don’t change how the blade or fence is set up.
On the other end, the fence has a new shape that lets you cut thin materials. There is also a 2.5-inch port for collecting dust. It’s easy to hook up to a vacuum to collect dust quickly.
10) Grizzly G0869-10″ 2 HP Benchtop Table Saw:
The Grizzly Industrial G0869 table saw has a riving knife to make it more useful. The table saw’s riving knife does a lot to keep you and the tools safe. Using the riving knife keeps two pieces of wood from joining together. If you don’t do this, the saw blade can pinch and cause dangerous kickbacks.
The 10″ x40T carbide-tipped blade on the other end of the table saw makes it more useful. The table saw is made with a die-cast aluminum table insert, which makes it not only light but also strong and durable.
This means that the table saw can handle even the toughest jobs. The table saw is made with a 4-inch outfeed extension support for better support. The built-in storage for accessories helps keep your things together.
The Grizzly G0869 table saw has a 2HP motor built into it. The way the motor is made gives it enough power, torque, and speed for the blades. Because it is so strong, it can cut through the thick and dense wood. Its variable speed lets it work with materials other than wood, like plastics and laminates.
A narrow rip fence is another feature of the table saw. Because of how it is made, it can be flipped down to make room for push sticks when working with thick or narrow materials.
11) Milwaukee 2736-20:
With one key, the Milwaukee 2736-20 can make as much power as a 15A corded saw. It can also cut about 600 linear feet of material per charge when ripping. It’s clear that this tool was made with a professional carpenter in mind. It will help both general contractors and people who do renovations.
This product is for you if you want to become an expert in the construction industry. The Milwaukee 2736-20 has also been made to be as productive, portable, and powerful as possible. So if you change jobs a lot, the tool will also work well for you.
Buying Guide, What to Consider When Buying the Best Table Saw Under $500?
When selecting a table saw, the variety of available options can be bewildering. Here, we’ll discuss the features you need to be aware of in order to purchase a table saw for less than $500.
Safety Features are Never Enough:
Safety is important to the people who make table saws, so it’s important to use all the safety features when choosing a table saw. The most basic safety feature to look for is a cover for the blade that moves back just enough to let the wood pass through.
The covers for the blades should be clear so that you can see what you are doing. Even though most blade covers can be taken off, you should always leave them on your saw.
A riving knife is another important safety feature that most new table saws have. This is basically a splitting knife that sits behind the main blade and grabs wood after it goes through the blade to stop a kickback.
As for blade covers, many table saws have riving knives that can be taken off and put back on, but you should always leave these on the saw. Some table saws also come with a pawl that stops kickback.
When making large rip cuts, these can be very helpful because they let you move the wood through the saw without putting your hands near the blade.
Putting Up a Fence:
Many woodworkers think that the rip fence is the most important part of a table saw. The fence is there to guide the wood through the blade, whether you’re making small, precise cuts or big rip cuts.
But not all fences are made the same, so it’s very important to find a saw with a strong and accurate fence. When making rip cuts, a straight fence makes it easier to make accurate cuts and reduces the amount of “kickback.” Also, since you’ll be moving the fence around the table all the time to adjust your cuts, it’s important that your saw has a system that lets you move the fence easily and accurately.
Precision and Capacity in Cutting:
Not surprisingly, accuracy is very important in any table saw. If your saw isn’t accurate, every time you try to repeat a cut, you’ll end up with boards of different sizes. When talking about a table saw, precision means that you should be able to set the fence and miter gauges to the same measurements and get the same exact cut every time.
It’s important that the saw’s accuracy stays the same over time. This is why you need a saw with a strong fence and miter gauge. Cheap versions of these parts can bend over time if they are used a lot.
Rip capacity is another important way to measure how well a table saw works. This is the widest cut you can make with the table and fence. Ripping capacities on portable and contractor saws are usually smaller than those on cabinet saws.
The Rockwell saw, which had the largest ripping capacity of the saws we looked at 30 inches, is still not big enough for woodworkers who want to do big projects. Keep in mind that rip capacity isn’t the only limit, since you can use a stand to cut bigger pieces of wood that are longer than your saw’s table.
Speed and Strength:
Most cheap table saws have a 15-amp motor, which is strong enough to cut through most softwood boards. But thick softwood boards and many hardwoods may be hard for these saws to cut.
The blade speed is important because it affects how smooth your cuts are and how likely they are to “kick back.” In general, a faster blade speed will make cuts with smoother edges and less “kickback.” The blade speeds of the saws we looked at aren’t that different from each other. Any blade speed between 4,500 and 5,000 rpm will make cuts that are pretty smooth.
All of the table saws we looked at that cost less than $500 had 10-inch blades. This is a common diameter that makes it easy to switch out blades. Still, the diameter of the blade can be different, and 12-inch blades are also quite common.
Keep in mind that the blades that come with most table saws aren’t too expensive. Changing the blade is one of the best ways to improve your saw.
Size, Weight, and Length of the Table:
If you plan to carry your saw from the job site to the job site or have a small workshop, its size, and weight are important things to think about.
Most Best table saws under $500 dollars are small, especially compared to hybrid and cabinet table saws, but some are smaller than others. For example, the Ryobi saw is made to be very light and easy to carry, but this makes it less able to cut through wood.
Keep in mind that many portable table saws have table extensions that make them smaller when they are being moved. During table use, you can fold these out or make them smaller. But keep in mind that many woodworkers find that these tables are not perfectly level and that they take more work to set up.
If you take care of your table saw, it should last for many years. However, it’s nice to have the peace of mind that comes with a warranty from the manufacturer. Saws from Dewalt, Ryobi, Rockwell, and Skilsaw all come with three-year warranties, and Dewalt and Ryobi will even give you your money back if you’re not happy with them within 90 days.
Bottom Line: Best Table Saw Under $500
This in-depth review and guide to the best table saws for less than $500 should help you narrow down the list to the one you like best. Choose a tool that will give you all the features you may need.
For us, the best table saw is always DEWALT DWE7485 Table Saw, and if you’re on a tight budget, you should always go for Ryobi 10 in. Table Saw.
Can the Blade of a Table Saw be Sharpened?
Yes, but it depends on the material and how hard or easy it is to sharpen a blade. You can sharpen a steel saw blade yourself with a file or a tool for sharpening blades. If the blade is made of carbide, you’ll probably need a pro to sharpen it because you’ll need a special set of tools.
Can You Cut Metal and Stone with a Cheap Table Saw?
You shouldn’t try to cut metal or stone with a cheap table saw that is made for cutting wood. This will not only hurt the blade, but it can also wear out the motor of your saw.
- Best Table Saw Under 1000
- Top 10 Best Table Saw Under 600 Dollars
- 10 Best Table Saw For Beginners: (Top Picks & Reviews)
- Can You Cut Plexiglass With a Table Saw?
- How To Sharpen Table Saw Blades
- How to Extend Rip Capacity of Table Saw?
- Can You Cut PVC With a Table Saw?
- Can You Cut Acrylic With A Table Saw?