To get the best results, it is important to choose the right saw for your type of work. But you need to think about things like the type of wood you will be cutting, the type of saw you will need, and any special features the saw has.
Still, many people wonder about can a track saw replace a table saw. So, yes, it can! But a lot also depends on the job you are going to do. There are ways to cut that work best with a track saw and ways that work better with a table saw.
On the other hand, most woodworkers don’t start out with a table saw and only buy one once they have their own workspace. But if you are new to working with wood, a table saw can make it easier.
What Is a Track Saw?
Track saws are a type of cutting tool that can be used to make straight cuts in boards of all sizes. With this circle saw you can cut pieces in different ways, such as with a cross-cut, a plunge cut, a rip cut, or an angle cut. The tool is easy to move around your workplace because it is movable.
A track saw is made up of a motor housing and a blade that spins and is connected to the housing with a clamp or bolt. It also has a handle and a plate to make sure that the surface cutting is done at the same level.
What Is a Table Saw?
On the other hand, a table saw is a tool for cutting that looks like a table. These are attached to the underside of a table’s surface, with the blade sticking out above the surface. The part of the saw that sticks out helps you cut wood with more control and precision.
A table saw has a cutting area made mostly of heavy-duty steel and cast iron. This is where the wood is placed to be cut. It has a strong circular saw and a blade that is 10 inches long. This also has a blade plate from which the blade lifts up and over the table.
Track Saw Vs Table Saw
Track Saw vs Table Saw: Even though both saws are great for working with wood, they have different features that make them different from each other. One might have more pros than cons, while another might not. So, it’s important to know these things if you want to decide what to do about the repair.
Accuracy:
One of the best things about a track saw is that it can cut straight and accurately. The fact that it has a guide rail takes away some of the guessing and makes things clear. A table saw is also very exact, but it is much too big to move around easily, which can be hard.
Cutting Narrow Rips:
Track saws have tracks that are much too wide to make lines that are straight and exact. If you want to make small cuts with a track saw, you’ll need more wood. On the other hand, table saws are best for this kind of cut because they don’t need any extra tools or gear. It is better than track saws because of this.
Cutting Thickness:
Before picking a saw to use, it’s important to think about how deep it can go. Depending on how thick or deep your board or pieces are, you need to find a saw that can reach the end.
Most table saws can make cuts that are 3 to 4 inches deep, while most track saws can only cut 2 inches deep. When cutting boards with more depth, a table saw is better, and vice versa.
Cutting Speed:
If you want to make money from woodworking, speed is an important thing to keep in mind. Time is money, so it’s important to finish the jobs on time.
If we’re talking about making boards of the same size, which are often used to make things like cabinets, then a table saw is the best option. It will help you finish the job quickly and easily.
You can cut as many boards as you want with the table saw without having to move the fence. If you use a track saw instead, you will need to mark each board after you measure it. Because of this, you might take a long time to finish the job.
On the other hand, a track saw is the best for cutting wheels and boards without leaving splinters. When you work on jobs that also involve wood flooring, you can have a lot of control.
Storage and Portability:
When it comes to portability, there is no question that the track saw is the winner. Since the table saw is set up on the table, you won’t be able to move your cutting tool around freely. With a track saw, you can move it around your work area and take it where you want.
Also, the track saw is easier to deal with than the table saw when it comes to storage. With a table saw, you need a lot of room space to work, so it takes up more space than a track saw.
Pros and Cons of Track Saw:
Here are the advantages and disadvantages of using a track saw.
Pros of Track Saw:
Lightweight:
A track saw is very light, which makes it easy to move around. It’s possible to use the tool anywhere and start sawing.
Exact Design:
The circle saw’s design makes plunge cutting easy. Making a few changes to the cut level is all you have to do.
Collection of Dust:
It has a dust collection system to keep the workers’ area clean. It might be good for your health and even keep you safe.
Cons of Track Saw:
Low Power:
Even the track saw’s drive motor doesn’t put out a lot of power. It will have a hard time cutting through thick wood.
No Versatility:
Track saws aren’t very versatile, so you can’t use them for a lot of different jobs.
Set-Up:
Setting up can take a lot of time. To get a clean cut, you will need to make sure you measure the slope right when you bolt the panel together.
Pros and Cons of Table Saw:
Here are the advantages and disadvantages of using a track saw.
Pros of Table Saw:
Easy to Use:
The table saw is simple to use because it only cuts in one way.
Better Accuracy:
You can get better precision and accuracy at any length with a table saw. If you have a permanent frame, you can work with different kinds of materials quickly and safely.
Versatility:
When you need to, you can use a table saw as either a miter gauge or a rip fence. This is great because it means you can use the correct pieces in many different ways.
Dust Collection:
Regarding your health, some models come with a dust collection system that can be very helpful.
Cons of Table Saw:
Safety:
A table saw can be more dangerous than a track saw. You won’t be able to make long, clean rips with it. You might also have trouble when working with big sheets or materials that are heavy.
Not as Portable:
You can use your table saw at work. Being off-side when you cut or saw can be a problem.
Can Damage Things:
One of the worst things about a table saw is that it’s not easy for anyone to use. When the boards don’t have the right amount of pressure or support, they can fly away. It’s possible to get hurt badly even if the lumber isn’t very heavy.
Bottom Line:
If you are still wondering can a track saw replace a table saw, here are some things to think about.
First, the track saw is the best tool for you if you are a woodwork lover who needs to make precise cuts in any size of wood. Also, you should buy a track saw right away if you don’t have enough floor room or your own workshop.
As time goes on and your projects become more unique and need more precise cutting, you can start using a table saw. If you have a table saw, you can make deeper cuts and more types of cuts more quickly. We hope that this piece has given you all the information you need to make the right choice!
FAQs
What Kind of Thickness can a Track Saw Cut?
Most track saws have blades that are 6½ inches long and can cut through things that are about 2 inches thick. Things that are about 2¾ inches thick can be cut with track saws that have blades that are about 8¼ inches long. Little track saws have blades that are 4½ inches across and can cut through things that are just over 1 inch thick.
Is it Possible to Use a Track Saw Without Clamps?
Most of the time, your saw track won’t need any clamps to stay in place. The track and the cloth have to rub against each other for this method to work, so it only works for long cuts. To keep the track on your material for faster cuts, make sure to use Track Saw Clamps.
What Sizes Do Table Saws Come In?
How big. The blade width tells you what kind of table saw it is. A 10″ blade is used on most models, but an 8″, 8-1/4″, or 8-1/2″ blade is used on some smaller versions. A common arbor size is 5/8″. This is the size of the hole in the middle of the blade.
Can I Replace My Table Saw with a Track Saw?
You can use a track saw instead of a table saw to make long cuts at an angle, get edges that don’t splinter, cut bigger plywood pieces, and work with edges that aren’t straight. But there are some things you can’t do with a plunge saw. For example, it’s hard to make narrow rip cuts and cut small bits of wood.
Meta Description:
