Top 10 Best Table Saw Under 600 Dollars

What is the Best Table Saw Under 600 dollars? Table saws come in different sizes and have a lot of different parts. But in the end, it comes down to what you want and what you can afford. If your budget is $600 or less, you will have a lot of choices.

Here are our top 10 favorite saws that you can buy for more or less than $600. They will help you get more done. We’ve used some of these saws before, so we can share our own knowledge. Let’s get started without further ado.

Our Recommendations Best Table Saw Under $600 Dollars

Image Product Details   Price
DEWALT DWE7491RS  Jobsite Table Saw DEWALT (DWE7491RS) Table Saw – Best Overall The 15-amp motor cuts materials quickly.

Rack and pinion fence adjustments are easy and accurate.

Its stand simplifies setup.
Check Price
SKIL SPT99T-01 SKIL SPT99T-01 8-1/4 Inch Portable Worm Drive Table Saw – Best Budget: Robust and Well Made
Compact Style

A storage compartment

Dead Accurate Accuracy
Check Price
DEWALT DWE7485Compact Jobsite Table Saw DEWALT (DWE7485) Table Saw – Best Quality Portable, lightweight table saw

Rack-and-pinion fence adjustments are smooth, accurate, and fast.

rips 24.5 inches.
Check Price

Top 10 Best Table Saw Under 600 Dollars:

1)DEWALT (DWE7491RS) Table Saw-Best Overall:

DEWALT DWE7491RS  Jobsite Table Saw

The DWE7491RS from Dewalt is a movable job site table saw. Dewalt makes some of the best power tools on the market, which should come as no surprise. So, how does this product from a company that has been around for 100 years compare to what else is out there?

In terms of power, it is a pretty powerful saw. With its 15 amp motor, it can go 4800 RPMs faster than before. But how well does it work when tested? It can cut up to 3.125 inches deep and rip up to 32.5 inches wide, which is pretty good for a compact saw.

During our tests, it was easy for it to cut 5/4-inch deck boards. The saw also had no trouble with plywood. The built-in stand, which is great for dealing with shocks.

There is a rack and pinion fence system already built in. It directs boards that run parallel to the blade. This method works well and can be changed by hand. The plastic miter gauge is the only thing we don’t like about this saw. Still, it doesn’t matter that much.

This DeWalt table saw can be used for a lot of things. It has everything you would need in a table saw for a job site. The saw’s ripping ability is one of the biggest on the market. This is a big reason why we put it at the top of our list.


  • The 15-amp motor cuts materials quickly.
  • Rack and pinion fence adjustments are easy and accurate.
  • Its stand simplifies setup.
  • It has a vacuum-compatible 2-inch dust collection port.
  • The saw has a built-in storage system for accessories.


  • It may be slow for larger materials.
  • It works with dado blades but has no dado plate.

2)SKIL SPT99T-01 8-1/4 Inch Portable Worm Drive Table Saw-Best Budget:


The good news is that you can use a Dado blade with the SKILSAW SPT99T-01 8-1/4′′ Portable Worm Drive Table Saw, but you can’t do that with the Dewalt 8.25.

Well, if you want the best compact worm drive table saw for less than $600, get it and thank me later.

With this saw, you can easily and accurately cut through even the hardest wood. It is one of the best portable worm drive table saws on the market because it is small and light.

With Skilsaw’s advanced precision rack and pinion technology, you can adjust the fence quickly and easily.

The SKILSAW SPT99T-01 8-1/4′′ Portable Worm Drive Table Saw has a 2-5/8 in. depth of cut and a 25 in. rip capacity, so it can easily cut through any wood material. The 45-degree and 90-degree stops on the blade were dead on.

This powerful tool is the best if you need a small and light worm drive table saw for your workplace or a DIY project.


  • Robust and Well Made
  • Compact Style
  • A storage compartment
  • Portability
  • Dead Accurate Accuracy


  • You may find it to be overpriced, but it is truly worth every penny.

3)DEWALT (DWE7485) Table Saw-Best Quality:

DEWALT DWE7485Compact Jobsite Table Saw

The first thing that will surprise you about the Dewalt is how heavy it is. About 53 pounds is how much this saw weighs. It is one of the table saws that are easiest to move around. But it’s not just great because it’s small and easy to carry.

With a 15 amp motor, it can easily match the speed of competitors that are heavier and bigger. This saw can easily cut through a 48 sheet of plywood or OSB that is 24.5 inches wide. 

A key feature of Dewalt table saws is the rack and pinion fence system. This method makes sure the fence stays in line with the blade. One of the best things about this method is how easy and smooth it is to change the fence.

Like the other Dewalt table on this list, this one has a place for all the tools to be stored on the table itself. You can store everything from the riving knife to the blade guard in this onboard storage.

One of the most portable and light choices is the Dewalt DWE7485. It is perfect for workers who need a portable table saw for the job site. The motor in this machine is powerful enough to do most jobs. 


  • Portable, lightweight table saw
  • Rack-and-pinion fence adjustments are smooth, accurate, and fast.
  • rips 24.5 inches.
  • Has a strong fence for cutting plywood and other materials.
  • Powerful motor cuts various materials


  • Stand sold separately.
  • Large pieces don’t fit the saw’s in-feed.

4)BOSCH 10 In. Worksite Table Saw:

Bosch 10-Inch Portable Jobsite Table Saw

Many people like the Bosch 4100-09 table saw. And when 4100-10 comes out, things can only get better. And they did get better. The 4100-10 takes what we liked about the 4100-09 and makes it even better.

This new type is powered by a motor that draws 15 amps and makes 4 Horsepower. The blade turns at 3650 RPM, which is fast enough to cut through most types of wood. In terms of rip ability, it can rip up to 25 inches.

Even though it’s not as big as the Dewalt’s 32.5-inch rip ability, it’s still big enough to cut in half sheets that are 4 feet wide. The cast aluminum top with a covered finish was one thing we liked a lot about this unit.

When it comes to the blade, Bosch gets rid of the previous model’s 40-tooth blade and replaces it with a 24-tooth carbide blade. I think it’s an improvement because it’s the best blade for rip cuts.

It’s not always easy to make something even better than it already is. So, the fact that 4100-10 is better than 4100-09 shows how well it works and how good it is. It is one of the best compact table saws you can buy for less than $600.


  • The table saw’s miter gauge is one of the best out-of-the-box ones we’ve seen.
  • Its 15-amp motor cuts almost anything.
  • Its portable saw rip capacity is high.
  • This saw has inbuilt storage.
  • Dado blades can replace the 24 teeth carbide blade.


  • Other types have clearer ruler guides.
  • The tabletop is smaller than other table saws.

5)SKIL  TS6307-00 15 Amp 10 Inch Portable Jobsite Table Saw:

SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00

If you’re serious about your DIY projects and want a table saw that can handle just about anything you’re likely to throw at it, but you’re not looking for the most expensive model or the most bells and whistles, you’ll find that the SKIL TS6307-00 Table Saw meets your needs and then some. 

This table jobsite saw is easy to set up and use yourself. It has a built-in stand with folding legs that make it easy to store when not in use.

The saw has a 15-amp motor with a maximum speed of 4,600 rpm, which is more than enough for cutting 4x4s. The 10-inch blade cuts quickly through both hard and soft woods, and the 25-by-24-inch table lets you rip-cut boards up to 25.5 inches to the right of the blade and 14 inches to the left. 

For long cuts, rack-and-pinion fence rails slide out smoothly and quickly. The bevel can be changed between -2 and 45 degrees. You can also make dado cuts with the right dado blade and throat system, which are sold separately. 


  • Reasonable cost
  • Excellent performance
  • Folding support


  • Noisy
  • Plastic miter gauge

6)Rockwell RK7323  Portable Tabletop Saw :

Rockwell RK7323 BladeRunner X2

This saw is different from the other types in this article because it is so small and compact and because it is so cheap.

The Rockwell RK7323 is a “mini” electric table saw. It weighs only 17 pounds and is ready to cut wood right out of the box. set up doesn’t have to be hard.

This table saw is surprisingly strong and exact for how small it is. However, it won’t be able to cut wood as big as other, bigger table saws. 

This table saw model is our 6th choice for the best table saw under $600 because it just doesn’t work as well as other models in this price range. However, it is by far the cheapest on this list.

If you don’t need a heavy-duty saw and are on a tight budget, this is a great buy that will get you by until you need a full-scale saw.


  • dust port
  • cheap
  • portability
  • Simple setup
  • easy-change blade


  • absence of protective measures
  • subpar construction and durability
  • low ripping capability
  • inadequate in effectiveness

7)Ryobi RTS12 Jobsite Table Saw:

Ryobi 10 in. Table Saw with Folding Stand

Even though not everyone needs a top-of-the-line table saw, that doesn’t mean you have to get a mediocre one. If your needs are simple and you only use the saw for simple jobs every now and then, you’ll find that the Ryobi RTS12 does everything you need it to do at a price that’s very reasonable. It comes with a stand that folds up, making it easy to store when not in use.

This job site table saw with a 10-inch blade and a 15-amp motor can turn the blade at up to 5,000 rpm. You can rip boards as far to the right as 12 inches and as far to the left as 8 inches from the blade.

There are no extending rails like on some more expensive table saws, but you could use a separate stand to support bigger pieces. Still, for the price, this tool is hard to beat for how well it works. At an angle of 90 degrees, the saw can cut up to 3 inches deep.


  • Folding support
  • Dependable efficiency


  • Small tear capacity
  • a few complaints regarding the miter gauge

8)Milwaukee 2736-20 M18 Table Saw:

Milwaukee Electric Tools 2736-21HD Table Saw

Most power saws have cords, and there’s a good reason for that. These tools are very strong and need a lot of power to keep going. But with the battery technology of today, more and more power tools can be used without a wire.

 The Milwaukee M18 Fuel One-Key Table Saw Kit is one of these tools. It has all the power of a table saw with a cord, but it runs on an M18 battery. The battery is powerful enough to cut up to 600 linear feet of the board before it needs to be charged again, so don’t worry that you’ll have to stop working often. 

The saw’s brushless motor can go up to 6,300 rpm, and the 8-1/4-inch blade can cut up to 2.5 inches deep at a 90-degree angle or 1.75 inches deep at a 45-degree angle. 

The table can be ripped to the right by 24.5 inches and to the left by 12 inches. With the angle setting, you can tilt the table to the left by up to 47 degrees. With the tool’s “Smart Key” app, you can keep track of where it is, turn it off from a distance, and see how well it is working. 

A stand is not included with this table saw, but Milwaukee sells them separately. It does come with a charger and battery.


  • Cordless
  • Powerful
  • Extended battery life


  • Expensive

9)Goplus Table Saw:

Goplus Table Saw

The Goplus 10 Inch Table Saw stood out to us for more than one reason. It was the cheapest table saw we looked at. It has a lithium-ion battery and a 10-inch blade with a 3-inch depth of cut. It can also use dado blades.

Now, let’s be clear: this table saw is not as good as the last two table saws we looked at. However, if you can look past its obvious flaws, it’s a lot of table saw for the price. Let’s look at the bad things first and then get back to the good things.

This table saw’s rip fence is a weakness for several reasons. It doesn’t have a rack and pinion like most table saws; instead, it has a handle that you lift to open and push down to lock.

Owners say that you should check the fence settings each time you make a change and before you cut, because you may need to make a small change to get it in the right place. The fence also doesn’t go all the way to the top, which makes it hard to cut full sheets correctly. 

Unlike the other inexpensive table saws on this list, it doesn’t have a port for a dust collector, so users will need to wear a dust mask and clean it often. 

The angle of the edge can be set to exactly 45 degrees. That may seem fine, but when I’ve used similar table saws, the differences in how they’re built can mean that you get just a little less than 45 degrees, which can be very annoying when mitering a corner.

On the plus side, it can be used with a Dado blade and cuts deeper than the other cheap table saws we looked at. Most owner reviews say that for a first table saw, the work isn’t very good. For the price, it’s a great cheap table saw. 

If money is the most important thing, we think this is the table saw to buy. You get a lot for your money, and it doesn’t try to be something it’s not. Even though it has some small problems, it’s a good choice for a first-time builder who wants to save money.


  • Contains a stand
  • 10-inch blade
  • Dado blade competent


  • It is incapable of trimming full-size sheets.
  • A complicated fence adjustment
  • No dust extraction outlet
  • Bevel capability is 45 degrees precisely

10)RIDGID R4514 Pro Jobsite Table Saw:

RIDGID R4514 Pro Jobsite Table Saw

Check out the RIDGID R5414 10-Inch Jobsite Table Saw if you need a strong, reliable table saw that is easy to move to where you need it. This 15-amp saw makes cutting 4×4 boards easy; it can do it in one pass.

 When the table is closed, it is 22 inches by 30 inches. If you take out the fence rails, you get an extra 12 inches to the right for ripping big boards. It has SOFTstart technology, which gradually speeds up the motor when the power is turned on. This makes the tool-less noisy and more accurate.

The 10-inch blade can go as fast as 5,000 rpm and can cut up to 3.5 inches deep at a 90-degree angle and 2.25 inches deep at a 45-degree angle. The saw comes with a strong, wheeled stand that can be folded up when the job is done to save space.


  • Large rip capacity
  • Stand with wheels
  • The showing was strong.


  • Some comments about rip fence quality

Buying Guide, What to Consider When Buying the Best Table Saw Under 600?

It’s not hard to find a good table saw for less than $600. But there are things you should think about to make sure you get the right table saw. Here are the most important things to look for in a table saw before you buy one.

The Blade:

Most table saws have blades that are 10 or 12 inches long. Most 10-inch blades are on table saws that cost less than $500 or even $600. These blades are good enough for most everyday jobs. For industrial jobs, you need bigger 12-inch blades.

But 10-inch blades will work just fine for less than $600. When cutting thick stock, smaller blades in this price range may have trouble.


If you want to spend $600 on a table saw, you probably want one that is easy to move and can be used for many different jobs. This means that the saw will move with you. So, portability is an important thing to think about.

Also, if you’re a hobbyist, you probably don’t have much space to store a big, heavy saw. A small and light choice will work just fine. You can get a compact saw that doesn’t take up much space for this price.


What extra parts come with the table saw? Before you spend money on one, it’s important to ask yourself this question. When you need to cut at an angle, tools like a miter gauge will come in handy.

Other things, like a fence, can help keep the wood in place. It’s also important to have space on board to store these extras. Others, like a dust port that can be connected to a hoover, help keep your work area clean.

Capacity to Rip:

Rip capacity is measured by how far to the right of the blade the rip fence can move. I suggest a rip capacity of at least 24 inches for large sheets of plywood. If you are working with standard 24 plywood, you should be fine with a rip capacity of less than 24 inches.


You could say that guarantees only matter for expensive table saws because they are such a big investment. But you could also make the same point about cheap table saws. At this price, they might be more likely to get broken.

Either way, a good guarantee is a good idea for a table saw that costs less than $600. There are warranties that range from full to restricted and last from one to three years. The coverage for the motor is the most important part of the guarantee to pay attention to. 

The motor is one of the most expensive safety features on a table saw, so you should make sure your guarantee covers it for as long as possible. If you push wood cuts while the table saw is banding, you could accidentally burn out the motor.

This is bad and dangerous for the motor, so be careful to stay away from it.

Bottom Line: Best Table Saw Under 600

In conclusion, when it comes to finding the best table saw under $600, the DEWALT (DWE7491RS) Table Saw emerges as our top pick. With its powerful motor, large cutting capacity, and sturdy construction, this table saw offers exceptional performance and durability. The DEWALT (DWE7491RS) Table Saw is designed to handle a wide range of woodworking tasks, making it suitable for both professional carpenters and DIY enthusiasts.

For those on a budget, the SKIL SPT99T-01 8-1/4 Inch Portable Worm Drive Table Saw is the best option. Despite its affordable price, this table saw doesn’t compromise on quality or features. It provides smooth and accurate cuts, thanks to its worm drive mechanism, and its compact design makes it highly portable and easy to transport to job sites.

If you’re looking for the best quality in a table saw, the DEWALT (DWE7485) Table Saw is an excellent choice. It combines precision, power, and durability to deliver outstanding results. With its rack and pinion telescoping fence system, this table saw ensures accurate and repeatable cuts, while its compact size makes it ideal for small workshops or tight spaces.

Ultimately, the choice between these table saws depends on your specific needs and preferences. Whether you prioritize power, affordability, or overall quality, there is a table saw in this price range that will meet your requirements. Investing in a reliable and efficient table saw is crucial for any woodworking project, and the DEWALT (DWE7491RS), SKIL SPT99T-01, and DEWALT (DWE7485) table saws offer excellent options for those seeking the best value within the $600 price range.


Can a 12″ Blade be Used on a 10″ Table Saw?

You might be wondering if you can switch out your 10-inch blade for a 12-inch one to get a deeper cut. But this isn’t a good idea. Most of the time, the motor of a table saw made for a 10-inch blade won’t be able to handle a bigger blade.

Also, the arbor, which is the hole in the middle of the blade that holds it in place, is not likely to be the same size on a 12-inch blade as it is on your 10-inch blade. This means that the fit might not be safe.

What’s the Most Dangerous Thing about a Table Saw?

The blade’s teeth can cut off a finger. The piece of work can become a dangerous projectile and be thrown back at the user at a high speed (“kickback”) when it is turned. It can shoot out a spray of sawdust, pieces of metal like nails that are stuck in the wood, and broken blade parts.

Related Post:

Leave a Comment

Your email address will not be published. Required fields are marked *